Identifying and Controlling Hazards
Course 101
Safety Certified Supervisor Series

MODULE FIVE: CONTROLLING HAZARDS

Engineering Controls

Enclosure of Hazards

When you cannot remove a hazard and cannot replace it with a less hazardous alternative, the next best control is enclosure. Enclosing a hazard usually means that there is no hazard exposure to workers during normal operations.

There still will be potential exposure to workers during maintenance operations or if the enclosure system breaks down. For those situations, additional controls such as safe work practices or personal protective equipment (PPE) may be necessary to control exposure.

Some examples of enclosure designs are:

• Complete enclosure of moving parts of machinery;
• Complete containment of toxic liquids or gases from the beginning to end of a process;
• Glove box operations to enclose work with dangerous microorganisms, radioisotopes, or toxic substances; and
• Complete containment of noise, heat, or pressure producing processes with materials especially designed for those purposes.

.